51 13 316 Removing and installing or replacing trim strip on roof gutter at left or right

Pull off edge protection (1) in marked area and unscrew the screw (1) below it.

Fig 1: Roof Gutter Trim Strip Edge Protection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Make sure that body is not damaged.

Unclip trim strip (1) from clamps (2) in direction of arrow starting at the front.

Installation note:

Fig 2: Removing Trim Strip From Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

To avoid leaks and noises, check all clips (2) for visible damage.

Replace faulty clamps (2).

Installation note:

Make sure sealing strip (2) is correctly fitted on trim strip (1).

Sealing strip (2) must not be damaged.

Fig 3: Sealing Strip And Trim Strip

Courtesy of BMW OF NORTH AMERICA, INC.