51 47 490 Removing and installing/replacing underbody protection (front)

Overview of Activities 

Key processes 

1. Removing the front underbody protection
2. Installing the front underbody protection

Additional Information 

Overview of Tightening Torques 

Use in Activity: 2

General information 

Key processes 

1. Removing the front underbody protection 
   NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
   • Loosen screws (1).
   • Loosen all screws along the line (2).
   • Remove underbody protection (3).
     Fig 1: Underbody Protection Screws

     Courtesy of BMW OF NORTH AMERICA, INC.
2. Installing the front underbody protection 
   NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
   • Position underbody protection (3).
   • Tighten all screws along line (2).
   • Tighten the screws (1)
     Fig 2: Underbody Protection Screws

     Courtesy of BMW OF NORTH AMERICA, INC.