65 11 075 Removing and installing/replacing DVD changer

Necessary preliminary tasks: 

• Disconnect BATTERY EARTH LEAD
• Remove DECORATIVE STRIP ON STORAGE COMPARTMENT/DVD CHANGER INSTRUMENT PANEL

Unclip trims (1) with a suitable tool and release screws behind.

Pull DVD changer (2) out of guide.

Unlock associated plug connection (3) and disconnect.

Remove DVD changer (2).

Fig 1: Identifying Trims, DVD Changer And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out VEHICLE PROGRAMMING/ENCODING .