33 41 Wheel Bearings
TIGHTENING TORQUE SPECIFICATION - WHEEL BEARINGS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Output shaft on drive flange hub | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M27 | Replace collar nut. Jointing torque and angle of rotation must be observed without fail. Jointing torque Angle of rotation |
100 Nm 45 ° |
| F06 M6/F10 M5/F12 M6/F13 M6 | M16 | Observe the repair instructions. Replace collar bolt and spring. Jointing torque Angle of rotation |
50 Nm 155 ° |
|
| F03 | M27 | Replace collar nut. | 420 Nm | |
| 2AZ Wheel bearing to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M12 | Replace screws. | 100 Nm |