23 11 Housing with lid
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 BMW M6 Gran Coupe, 2018 BMW M6 Gran Coupe, 2017 BMW M6 Gran Coupe, 2016 BMW M6 Gran Coupe, and 2015 BMW M6 Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - HOUSING WITH LID
| TRANSMISSION DESIGNATION | Type | Thread | Tightening specifications | Dimension |
|---|---|---|---|---|
| 1AZ Transmission housing, rear section/front section | B/C/D/E/F/G/H/I/7-speed SMG | 22 Nm | ||
| 2AZ Cover with guide tube/transmission case | B/C/D/E/F/G/H/I/C/7-speed SMG | M8 x 22 | 18 Nm | |
| B/C/D/E/F/G/H/I/C/7-speed SMG | M8 x 30 | 25 Nm | ||
| B/C/D/E/F/G/H/I/C/7-speed SMG | M6 | 10 Nm | ||
| 3AZ Bearing cap/sealing flange | B/C/D/E/F/G/H/I/7-speed SMG | 10.5 Nm | ||
| 4AZ Reverse gear wheel axle to intermediate housing | B/C/D/E/F/G/H/I/7-speed SMG | 49 Nm | ||
| 5AZ Retaining plate for reverse gear wheel axle to intermediate case | B/C/D/E/F/G/H/I/7-speed SMG | 25 Nm | ||
| 6AZ Transmission closing plate | B/C/D/E/F/G/H/I/7-speed SMG | M6 | 8 Nm | |
| 7AZ Transmission oil strainer in transmission | G-transmission | M18 | 25 Nm |