34 21 Rear brakes
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2019 BMW M6 Gran Coupe, 2019 BMW 650i Gran Coupe xDrive, 2019 BMW 650i Gran Coupe, 2019 BMW 640i Gran Coupe xDrive, and 2019 BMW 640i Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - REAR BRAKES
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Brake disc to wheel hub | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M8 | Renew screw. | 16 Nm |
| 2AZ Caliper carrier to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M12x1.5 | Renew screws. | 110 Nm |
| F03 | M14x1.5 | Replace screws. Attention: Observe 4 phase tightening! Jointing torque Release Jointing torque Angle of rotation |
150 Nm min.90 ° 150 Nm 180°± 15° |
|
| F25/F26 | M12x1.5 | Replace screws. Jointing torque Angle of rotation |
75 Nm 45°10° |
|
| 3AZ Protective plate to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M6 | Renew screws. | 12 Nm |
| 4AZ Guide screw (brake caliper to caliper carrier) | F01, F02, F03, F04, F07 | WAF 7 | 30-5 Nm | |
| 5AZ Guide screw (brake caliper to caliper carrier) | F06/F10/F12/F11/F13/F18/F25/F26 | WAF 13 | Renew screws. | 35 Nm |