21 52 Clutch operation (hydraulic)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 BMW M6 Gran Coupe, 2018 BMW M6 Gran Coupe, 2017 BMW M6 Gran Coupe, 2016 BMW M6 Gran Coupe, and 2015 BMW M6 Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CLUTCH OPERATION (HYDRAULIC)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Clutch slave cylinder to clutch housing/transmission housing | F06/F10/F11/F12/F13/F18/F20 N47/F25/F26/F30/F31/F34 N47/F80/F82/F83 | Replace nuts | 22 Nm | |
| F20/F21/F22/F23/F30/F31/F32/F33/F34/F35-N13/N20/F10-N20/F36/F87 | Replace screws | 19 Nm | ||
| 2AZ Clutch master cylinder on bearing support | F20/F21/F22/F23/F30/F31/F32/F34/F35/F36/F80/F82/F83/F87 | 22 Nm |