41 62 Rear lid
TIGHTENING TORQUE SPECIFICATION - REAR LID
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Tailgate to tailgate hinge | F01/F02/F03/F04/F10/F12/F13/F06 | M8x19.5 8.8 | 18.5 Nm | |
| F11 | ISA M8x22 | 18.5 Nm | ||
| F07 | M8 countersunk screw | 18.5 Nm | ||
| F07 | M10 x 34 | 36 Nm | ||
| 2AZ Tailgate hinge to body 2AZ Holder to hinge 2AZ Hinge holder to body |
F01/F02/F03/F04/F10/F12/F13/F06 | nut M8 | 18.5 Nm | |
| F07 | M8 x 20 | 18.5 Nm | ||
| F11 | ISA M8x22 | 27 Nm | ||
| F11 | ISA M6x12 | 10 Nm | ||
| F12 | M6x12 | 7.6 Nm | ||
| F12 | M8x16 | 18.5 Nm | ||
| 3AZ Hinge bolt | F01/F02/F03/F04/F10/F13/F06 | nut M8 | 18.5 Nm | |
| 4AZ Tailgate lower section to hinge | F07 | M8 x 17 | 18.5 Nm | |
| 5AZ Tailgate lower section hinge to tailgate | F07 | nut M8 | 18.5 Nm | |
| 6AZ Limit position, tailgate to body | F07 | M6 x 21 | 6 Nm | |
| F07 | nutM6 | 6 Nm | ||
| F07 | M12x1.5 | 16 Nm | ||
| 7AZ Ball pin for gas pressure spring to body | F07 | M10 | 36 Nm | |
| 8AZ Earth cable to hinge | F12 | M6 | 8 Nm |