23 11 Housing with lid

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2016 BMW 335i xDrive, 2016 BMW 335i, 2015 BMW 335i xDrive, 2015 BMW 335i, and 2015 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION - HOUSING WITH LID

		Type	Thread	Dimension
1AZ	Transmission housing, rear section/front section	H/I-transmission		22 Nm
2AZ	Lid guide tube/transmission housing	H/I/K-gearbox	M8 x 22	18 Nm
		H/I/K-gearbox	M8 x 30	25 Nm
		H/I/K-gearbox	M6	10 Nm
3AZ	Bearing cap/sealing flange	H/I-transmission		10.5 Nm
4AZ	Reverse gear wheel axle to intermediate case	H/I-transmission		49 Nm
5AZ	Holding plate for reverse gear wheel axle to intermediate case	H/I-transmission		25 Nm
6AZ	Transmission closing plate	H/I-transmission	M6	8 Nm
7AZ	Grounding cable to transmission		M8	19 Nm
8AZ	Ground cable to body		M8	19 Nm

TIGHTENING TORQUE SPECIFICATION - HOUSING WITH LID

Transmission designation		Type	Thread	Dimension
1AZ	Transmission housing, rear section/front section	B/C/D/E/F/G/H/I/7 -speed SMG		22 Nm
2AZ	Cover with guide tube/transmission case	B/C/D/E/F/G/H/I/C/7-speed SMG	M8 x 22	18 Nm
		B/C/D/E/F/G/H/I/C/7-speed SMG	M8 x 30	25 Nm
		B/C/D/E/F/G/H/I/C/7-speed SMG	M6	10 Nm
3AZ	Bearing cap/sealing flange	B/C/D/E/F/G/H/I/7 -speed SMG		10.5 Nm
4AZ	Reverse gear wheel axle to intermediate housing	B/C/D/E/F/G/H/I/7 -speed SMG		49 Nm
5AZ	Retaining plate for reverse gear wheel axle to intermediate case	B/C/D/E/F/G/H/I/7 -speed SMG		25 Nm
6AZ	Transmission closing plate	B/C/D/E/F/G/H/I/7 -speed SMG	M6	8 Nm
7AZ	Transmission oil strainer in transmission	G-transmission	M18	25 Nm