Position of seal (3) on rear door

Fig 1: Identifying Position Of Seal On Rear Door

Courtesy of BMW OF NORTH AMERICA, INC.

Area (A) at distance (F) to door rabbet.

Area (B) at line (1) of positioning aids (2) to be stuck on (observe following work steps).

Clean bonding surfaces on paint with adhesive cleaner (sourcing reference: BMW Parts Department).

F = 3.6 mm

Fig 1: Identifying Position Of Seal On Rear Door

Courtesy of BMW OF NORTH AMERICA, INC.

Area (C) at distance (G) to inner door panel.

Area (D) at distance (H) to door rabbet.

Area (E) at distance (I) to door rabbet.

Clean bonding surfaces on paint with adhesive cleaner (sourcing reference: BMW Parts Department).

G = 55.3 mm

H = 4.4 mm

I = 6.7 mm