37 14 Electric components
TIGHTENING TORQUE SPECIFICATION - ELECTRIC COMPONENTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Holder, ride height sensor, to body | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M6 | 8 Nm | |
| 2AZ | Ride height sensor holder to rear axle support | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18/F25 | M6 | 8 Nm | |
| 3AZ | Ride height sensor to holder | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18/F25 | M5 | 5 Nm | |
| 4AZ | Sensor lever, ride height sensor to jointed rod | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18/F25 | M6 | Replace nut | 8 Nm |
| 5AZ | Jointed rod to wishbone/trailing arm | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18/F25 | M6 | Replace nut | 8 Nm |
| 6AZ | Control unit, Dynamic Drive/VDM, to A-pillar (inner) | F01/F02/F07/F10/F11/F12/F13/F18 | Replace nut | 3 Nm | |
| 7AZ | Valve block to body | F01/F02/F07/F10/F11/F12/F13/F18 | M6 | 8 Nm | |