LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> 750Li >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Self Diagnosis - Diagnostic Trouble Codes - Bank 2 (N63TU) >> Fault Code Tests >> DTC U11D9: BMW DTC CDE425; DME -- Message Monitoring Slave-ECM With Master-ECM Interconnection 3 Check Sum Error >> Condition for fault identification

Condition for fault identification

Supply voltage between 9 and 16 volts.

Terminal 15 on

PRD status: Driving

PRD status: Living

NOTE: The designations of terminal status or PRD status apply according to the vehicle electrical system of the vehicle.
scientia non olet · About LEMON Manuals