51 16 040 Removing and installing/replacing housing on left or right exterior mirror (2012-2015 version 2)

Necessary preliminary work:

Release screws (1).

If necessary, disconnect the connector from the top view camera.

Installation note:

Ensure latch mechanism (2) is correctly seated.

The latch mechanisms (2) on the housing (3) must not be damaged or missing.

Fig 1: Identifying Latch Mechanism, Housing, And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully loosen screw holes (1) from exterior mirror (2).

Feed out housing (3) downward.

Installation note:

The bore holes (1) on the housing (3) must not be damaged or missing.

Fig 2: Identifying Exterior Mirror, Housing And Screw Holes

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove the turn indicator (1) from the housing (2) in the direction of the arrow.

For replacements with top view camera equipment specification:

Remount the TOP VIEW CAMERA

Fig 3: Removing Turn Indicator
Courtesy of BMW OF NORTH AMERICA, INC.