72 11 092 Removing and installing or replacing rear left or right seat belts

Necessary preliminary work: 

• Remove rear window shelf. See REMOVING TRIM PANEL FOR STORAGE SHELF or REMOVING TRIM PANEL FOR STORAGE SHELF (WITH ROLLER SUNBLIND) .
• Remove REAR SEAT .

Removing left or right automatic reel: 

Release screw (1).

Tightening torque 72 11 21AZ .

Installation note: 

End fitting is coded against incorrect assembly.

Release screw (1).

Tightening torque 72 11 20AZ .

Remove automatic reel (2) with end fitting.

Installation note: 

Pay attention to encoding.

Push inertia reel unit (1) onto body tab (2).