51 35 Electrical window systems Operation, rear
TIGHTENING TORQUE SPECIFICATIONS - ELECTRICAL WINDOW SYSTEMS OPERATION, REAR
| Type | Thread | Tightening specifications | Value | |
|---|---|---|---|---|
| 1AZ Flat motor to power window regulator | F01 / F02 / F04 / F10 / F11 / F18 | Oval-head screw for thermoplastic | 5.5 Nm | |
| 2AZ Power window regulator to door | F01 / F02 / F04 / F10 / F11 / F18 | Oval-head screw, self-locking | 11.8 Nm | |
| F25 | 9.5 Nm | |||
| 3AZ Side window, rear, non-opening (bottom) | F01 / F02 / F04 / F10 / F11 / F18 | 7.6 Nm | ||
| 4AZ Cover, window frame, B-pillar | F01 / F02 / F04 / F10 / F11 / F18 | 2.5 Nm | ||
5AZ Cover, window guide web
|
F01 / F02 / F04 / F10 / F11 / F18 | 3 Nm | ||
| 6AZ Roller sunblind | F01 / F02 / F04 | 9 Nm | ||
| 7AZ Cover, window frame (B-pillar) to SBL, rear | F01 / F02 / F04 | M5x30 | Oval-head screw | 2.5 Nm |
| F01 / F02 / F04 | ST4.8x19 | Sheet metal screw | 2 Nm | |
| 8AZ Guide rail to end plate | F01 / F02 / F04 | Oval-head screw for thermoplastic | 3 Nm | |
| F01 / F02 / F04 | ST4.8x19 | Sheet metal screw | 2 Nm | |
| 9AZ Roller shell | F01 / F02 / F04 | Oval-head screw for thermoplastic | 3 Nm | |
| F01 / F02 / F04 | Flat-head screw | 8 Nm | ||
| 10AZ Window guide rail rear, to window partition web | F01 / F02 / F04 | 8 Nm | ||
| 11AZ Holder to inner door panel | F01 / F02 / F04 / F10 / F11 / F18 | 5.5 Nm | ||
| 12AZ Power window regulator to door | F03 | Hexagon screw | 18.5 Nm | |
| 13AZ Side window, rear, non-opening (top) | F10 / F11 / F18 | 2.5 Nm | ||
| 14AZ Cover, window frame (C-pillar) | F11 | 1.5 Nm |