12 31 020 Removing and installing or replacing alternator (N55)

Necessary preliminary work:

NOTE: In order to remove the alternator, it is necessary to remove the AIR CONDITIONING COMPRESSOR .

IMPORTANT:

When removing the A/C compressor:

Do not draw off A/C system refrigerant.
Do not detach refrigerant lines from A/C compressor.
Do not remove air conditioning compressor; instead, release from bracket only and place to one side.

Release screws (1).

Tightening torque 12 31 1AZ .

Release screw (2).

Tightening torque 12 31 2AZ .

Release screw (3) and remove with holder (4).

Tightening torque 12 31 2AZ .

Fig 1: Identifying Alternator Holder And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock connector (1) and remove.

Remove protective cap (2) and release nut underneath.

Tightening torque 12 42 1AZ .

Remove positive battery cable(3).

Fig 2: Identifying Alternator Connector And Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: For purposes of improved clarity, illustrations and description show A/C compressor removed.

Release screws (1) a few turns until bracket (2) is loose. Do not remove bracket (2).

Tightening torque 12 31 3AZ .

Feed out alternator (3) and remove.

Fig 3: Identifying Alternator Bracket And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.