51 43 075 Removing and installing/replacing side trim panel, footwell, on A-pillar, right

Necessary preliminary tasks: 

• Remove DOOR SILL COVER STRIP, FRONT (INSIDE)  right
• Remove TRIM FOR INSTRUMENT PANEL AT BOTTOM RIGHT .

Detach edge protection (1) in area of side trim (3).

Release clips (2) in direction of arrow.

Pull out side trim panel (3) from carpet.

Fig 1: Releasing Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Following parts of side trim panel (4) must not be damaged or missing:

1. Clips
2. Insulating mat
3. Tabs (for inserting in carpet)

Fig 2: Identifying Clips, Insulating Mat And Tabs

Courtesy of BMW OF NORTH AMERICA, INC.