11 12 Cylinder Head And Cylinder Head Cover
CYLINDER HEAD AND CYLINDER HEAD COVER SPECIFICATION
| Cylinder head height: Original dimension | mm | 134.00 ± 0.05 |
| Machining limit | mm | 133.70 ± 0.05 |
| Valve guides are not available as replacement parts. | ||
| Inner diameter of installed valve guide | ||
| Original intake valve | mm | 6.00... 6.02 |
| Original exhaust valve | mm | 6.00...6.02 |
| Tilt clearance, maximum (wear between valve and valve guide) |
mm | 0.06...0.22 |
| Bearing of camshaft | ||
| Guide bearing (width) | mm | 13.99.. 14.04 |