32 41 100 Removing And Installing/Replacing Belt Pulley On Vane Pump For Power Steering
NOTE:
Carry out preliminary work as described in the information " Replacing drive belt". See 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N63)
, 11 28 010 REMOVING AND INSTALLING/REPLACING DRIVE BELT FOR ALTERNATOR (N57 D30 U/O/T 1)
, 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N52T)
, 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N55)
, 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (S63T 0)
or 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N63O1)
.
Slacken screws (1)
Relieve tension on drive belt and remove from belt pulley (2). See 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N63) , 11 28 010 REMOVING AND INSTALLING/REPLACING DRIVE BELT FOR ALTERNATOR (N57 D30 U/O/T 1) , 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N52T) , 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N55) , 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (S63T 0) or 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N63O1) .
Unscrew bolts (1) and remove belt pulley (2).
Installation note:
Lettering on belt pulley (2) must point forwards.
Replace microencapsulated screws.
Tightening torque: 32 41 4AZ .