17 11 035 Removing And Installing/Replacing Fan Cowl With Electric Fan (N57 D30 U/O/T 0/1)
Necessary preliminary tasks:
- Switch off ignition.
- Remove CROSS CONNECTION .
Unclip coolant hose from fan cowl (1).
Unlock and disconnect connector (1) on fan cowl on right.
Unclip fan cowl (1) at clamps (2) on left and right, thread out in upward direction and remove.
Installation note:
Insert retaining tab (1) at bottom on module carrier.
NOTE:
Check stored fault message.
Reassemble the vehicle.
Delete fault memory.
Reassemble the vehicle.
Delete fault memory.