22 11 011 Replacing left engine mount (N63)

Necessary preliminary tasks

Secure engine in INSTALLATION POSITION .
Remove rear UNDERBODY PROTECTION .
Lower FRONT AXLE SUPPORT .

Release bolt (1) and remove engine mount.

IMPORTANT: Installation note:
To ensure play between engine mount and engine support arm, lower the engine completely before tightening the screw connection (engine mount/engine support arm).
Tightening torque 22 11 2AZ .

Fig 1: Identifying Engine Mount Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Rubber part (1) of engine mount must point to center of vehicle.

Fig 2: Identifying Rubber Section Of Engine Mount

Courtesy of BMW OF NORTH AMERICA, INC.