61 31 195 Removing and installing (replacing) front controller

IMPORTANT: Risk of damage!
The button for the controller must not be removed!

Necessary preliminary work:

Removal

Release all screws (1).

Remove controller (2) from center console trim (3).

Fig 1: Identifying Center Console Trim, Controller And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation

Mount controller (2) on center console trim (3) and tighten with screws (1).

Tightening torque 61 31 2AZ .

Fig 2: Identifying Center Console Trim, Controller And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Required follow-up work