11 41 115 Removing and Installing/Replacing Hydraulic Valve (N55)
Necessary Preliminary Tasks:
- Remove Fan Cowl with Electric Fan.
- Have A Cleaning Cloth Ready To Catch Escaping Oil
Detach Plug (1) From Hydraulic Valve (2).
Release Screw (1) and Remove Hydraulic Valve.
Tightening torque: 11 41 4AZ .
Replace O-Ring (1).
Assemble Engine.
Check Function of Digital Engine Electronics.
CHECKING ENGINE OIL PRESSURE .
- DME Motor Electronics
- Complete Vehicle
- Drive
- Engine Electronics
- Engine Oil
- Oil-Pressure Control