11 12 040 Removing and Installing All Ignition Coils and Injector Wells (N55)

Necessary Preliminary Tasks: 

• Remove CYLINDER HEAD COVER .
• REMOVE All Injectors.

Release Screws (1).

Tightening torque: 11 12 8AZ .

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Check Fitting Bushes (1) for Damage.

Installation Note: 

Replace Gasket (2).

Fig 2: Identifying Bushes and Gasket

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble Engine.