11 33 062 Removing and Installing/Replacing All Hydraulic Valve Clearance Compensating Elements (HVC) (N63O1)

Special Tools Required: 

• 11 4 480 .

Necessary Preliminary Tasks: 

• Remove All Rocker Arms. See LEFT SIDE  and RIGHT SIDE .

Remove Hydraulic Valve Clearance Compensating Elements (1) In Direction of Arrow.

If The Valve Clearance Compensating Elements Are To Be Reused, Set Them Down In An Orderly Fashion On Special Tool 11 4 480 .

Fig 1: Removing Hydraulic Valve Clearance Compensating Elements

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble Engine.