61 31 336 Removing and installing/replacing cover for gear selector switch

Necessary preliminary tasks: 

• Disconnect NEGATIVE BATTERY CABLE .
• Remove both negative battery cables atF03
• Remove CENTER CONSOLE COVER 

Release screws (1) and raise trim for gear selector switch (2) slightly.

Unlock and disconnect plug connection underneath for EMF switch.

Twist cover for gear selector switch (2) 90° and feed out upwards from the gear selector switch.

Fig 1: Identifying Gear Selector Switch With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Remove EMF SWITCH .