51 16 080 Removing and installing or replacing sun visor and left or right counter support

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Lever out cover (1) on joint.

Lever out trim (2) on counter support.

Installation note:

Cover (1) and trim (2) must not be damaged.

Fig 1: Identifying Cover And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 51 16 02AZ .

Disconnect plug connection for light and remove sun visor.

Installation note:

Perform function check on lighting.

Fig 2: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.