41 00... Frame Alignment Control Body Dimensions

Dimensions in mm.

Measurement tolerances:

The control points shown serve to check the body and the straightening attachment.

The specified dimensions/measurements always refer to the center point of the bore/screw.

Under Body View 1

Fig 1: Under Body Frame Alignment Control Dimension And Measurement Points (Under Body View 1)

Courtesy of BMW OF NORTH AMERICA, INC.

Underbody view 2

Fig 2: Under Body Frame Alignment Control Dimension And Measurement Points (Under Body View 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Top View, Front End

Fig 3: Front Body Frame Alignment Control Dimension And Measurement Points (Top View, Front End)

Courtesy of BMW OF NORTH AMERICA, INC.

The specified dimensions refer to removed assemblies.

View, B-pillar

Courtesy of BMW OF NORTH AMERICA, INC.

Measurement a=1628 mm between screw-on points of door brakes.