34 00 012 Parking brake function check
- Connect BMW diagnosis system.
- Carry out vehicle test
- Call up "Workshop braking-in" service function.
- Start breaking-in program.
- (Parking brake indicator lamp in instrument cluster flashes at low frequency)
- Drive vehicle onto brake analyzer and pull parking brake button once.
- Parking brake is applied at approx. 15 km/h with reduced force.
- (Parking brake indicator lamp in instrument cluster flashes at high frequency)
- Breaking-in procedure takes 3 minutes.
- Breaking-in procedure can be terminated by pressing the parking brake button.
- Delete fault memory.