51 35 Power windows, rear
TIGHTENING TORQUE SPECIFICATIONS - REAR POWER WINDOWS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Door window glass to power window regulator | F06/F07 | Multipoint screw | 12 Nm | |
| With special tool 51 3 240 and torque wrench (long lever arm) | 9 Nm | ||||
| 2AZ | Side window, stationary to inner door panel | F06/F07 | M6 | 7.5 Nm | |
| 3AZ | Side window, stationary to door bottom | F06/F07 | M6 | 7.5 Nm | |
| 4AZ | Preloading adjustment | F06/F07 | M8 | 16 Nm | |
| 5AZ | Roller sunblind drive to inner door panel | F07 | 3 Nm | ||
| 6AZ | Adjustment cavity gap | F06/F07 | M6 | 9.5 Nm | |
| 7AZ | Window regulator to inner door panel | F06/F07 | M6 | 9.5 Nm | |
| 8AZ | Flat motor to inner door panel/mounting plate | F06/F07 | 3 Nm | ||
| 9AZ | Flat motor holder to inner door panel | F07 | 3 Nm | ||
| 10AZ | Mounting plate on inner door panel | F06 | 8 Nm | ||