51 13 402 Removing and installing/replacing handle strip

Necessary preliminary tasks:

Release screws (1).

Tightening torque 51 13 2AZ .

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken nut (1).

Tightening torque 51 13 3AZ .

Fig 2: Identifying Slacken Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Detach handle strip (1) in direction of arrow from tailgate.

Fig 3: Detaching Handle Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plugs (3) and (4).

Check clips (2) for any damages. replacing if necessary.

IMPORTANT: If clip mountings (1) are removed during further operations (e.g. painting), always replace these mounting to ensure watertightness.

Fig 4: Identifying Plugs And Clips

Courtesy of BMW OF NORTH AMERICA, INC.