51 16 045 Removing and installing/replacing retaining ring on left or right exterior mirror (from 07/13)

Necessary preliminary tasks:

Version with lane change warning:

Unlock plug connection (1) for optical signal transmitter and disconnect.

Fig 1: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1 and 2).

Installation note:

Note installation position of screws (1 and 2).

Make sure retaining ring (3) is correctly seated (arrows).

Fig 2: Locating Retaining Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Release latch mechanism (1) and feed out retaining ring (2) towards rear.

Fig 3: Identifying Latch Mechanism And Retaining Ring

Courtesy of BMW OF NORTH AMERICA, INC.