51 47... Removing and installing/replacing damper for screen

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary tasks:

Release circlip (2) and remove pin (3).

Fig 1: Identifying Circlip And Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Feed damper (1) towards front/top.

Fig 2: Removing Damper

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Bush (1) of lever for screen (2) must not be damaged and must be installed.

Fig 3: Identifying Bush And Lever For Screen

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Assemble individual parts of damper unit according to illustration.

Install slide housing from damper unit (1) on screen frame.

Fig 4: Installing Slide Housing From Damper Unit

Courtesy of BMW OF NORTH AMERICA, INC.