51 47... Removing and installing/replacing cargo cover (middle) trim

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary tasks:

If necessary, tilt rear seat backrests forward
If necessary, fold cargo cover (middle) forwards.

Unclip lock trim (1) at marked locations and remove.

Fig 1: Identifying Lock Trim

G09879599

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining clips (2) of lock trim (1) must not be bent or broken.

Fig 2: Identifying Retaining Clips Of Lock Trim

G09879600

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 51 47 8AZ .

Fig 3: Identifying Screws

G09879601

Courtesy of BMW OF NORTH AMERICA, INC.

Fold cargo cover (middle) upwards.

Unhook cargo cover trim (1) towards top.

Fig 4: Removing Cargo Cover Trim

G09879602

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Plastic hooks (2) of cargo cover trim (1) must not be damaged.

Fig 5: Identifying Plastic Hooks And Cargo Cover Trim

G09879603

Courtesy of BMW OF NORTH AMERICA, INC.