61 35 201 Removing and installing (replacing) power amplifier (LCPA) (left or right)

IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD PROTECTION) .

Necessary preliminary tasks:

Unlock plug connections (1) and disconnect.

Unlock latch mechanism (2) and pull power amplifier (3) towards the rear out of holder.

Fig 1: Power Amplifier, Latch Mechanism And Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure guide (1) of power amplifier (2) correctly fits in holder.

Fig 2: Power Amplifier And Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

NOTE: Encoding of the power amplifier is carried out using the (FEM).