66 53 030 Removing and installing/replacing side view camera on left or right

WARNING: This page is about a different car, the 2014 BMW 428i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Picture shows front wheel removed for purposes of clarity

Release screws (1).

Fold wheel arch panel (2) to one side.

Fig 1: Identifying Wheel Arch Panel Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove side view camera (2).

Unfasten plug connection (3) and disconnect.

Fig 2: Identifying Side View Camera Plug Connection, Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

"Teaching" using the BMW diagnosis system:

04 Driver assistance
All-round vision camera
Calibrating and "teaching" system for all-round vision camera