51 46 001 Removing and installing (replacing) storage shelf trim panel

Necessary preliminary work:

Version with roller sunblind:

Release screws (1) on luggage compartment floor (2).

Tightening torque: 51 46 3AZ .

Fig 1: Luggage Compartment Floor Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Version with roller sunblind:

Release and disconnect plug connection (1) at right C-pillar.

Fig 2: Shelf Trim Panel Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off gasket (1) from storage shelf (2).

Fig 3: Storage Shelf Gasket

Courtesy of BMW OF NORTH AMERICA, INC.

Release expanding rivet (1).

Slightly raise storage shelf (2) at front and unlock and detach plug connections underneath for speaker.

Remove storage shelf (2) toward the inside.

Fig 4: Storage Shelf Rivet

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure storage shelf is correctly seated in ventilation grille (1).

Fig 5: Ventilation Grille

Courtesy of BMW OF NORTH AMERICA, INC.

In the case of replacement with appropriate version: