51 47 151 Removing and installing/replacing left luggage compartment wheel arch trim

Necessary preliminary tasks:

Lever out cover (1) and release screw underneath.

Tightening torque: 51 47 1AZ .

Remove lashing eye (2).

Fig 1: Lashing Eye And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Remove storage tray (1) in upward direction.

Fig 2: Storage Tray

Courtesy of BMW OF NORTH AMERICA, INC.

Release expanding rivets (1).

Feed out luggage compartment wheel arch panel (2) in direction of arrow

If necessary, unlock plug connection for charging socket and disconnect.

Installation note:

Luggage compartment wheel arch panel (2) must fit correctly under tailgate rubber seal (1).

Fig 3: Pulling Luggage Compartment Wheel Arch Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement and version with charging socket:

Lever out charging socket (1) in direction of arrow.

Fig 4: Removing Charging Socket

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement (depending on version):

NOTE: Similar to graphic.

Unclip tensioning strap (1).

Detach luggage compartment net (2) at holder (3).

Release lock washer (4) and feed out luggage compartment net (2).

Unscrew holder (3).

If necessary, apertures for tensioning strap (1) and luggage compartment net (2) must be cut out at mark on rear side.

Fig 5: Luggage Compartment Net, Tensioning Strap, Holder And Washer

Courtesy of BMW OF NORTH AMERICA, INC.