63 17 255 Removing and installing/replacing right fog light (LED technology)

WARNING: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS)

Necessary preliminary tasks:

For engine versions N55:

On all other versions:

NOTE: Perform operations on right side the same as the left side shown, use graphics in mirror image.

Fold wheel arch cover (1) back.

Unfasten plug connection (2) and disconnect.

Fig 1: Identifying Wheel Arch Cover And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Release nut (2) and remove fanfare (3).

Fig 2: Identifying Fanfare Plug Connection And Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 63 12 2AZ .

Remove fog light (2) out of bumper panel (3) in direction of arrow.

Fig 3: Removing Fog Light

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Guides (1) on fog light (2) must not be damaged or missing.

Fig 4: Identifying Fog Light Guides

Courtesy of BMW OF NORTH AMERICA, INC.

On replacement of fog light or bumper panel at front: