Procedure Steps

safety instructions 

RISK OF DAMAGE 

Scratches. 

Tools and sharp-edged components can cause scratches.

• Protect working area.
• Handle tools and components carefully.

1. - Remove trim for selector lever 
   • Partially fit special tool 0 493 687 (00 9 340)  as pictured.
   • Lift trim for selector lever (1) all around and remove upwards.
   • If necessary, unlock associated plug connection and disconnect.
     Fig 1: Installing Special Tool (00 9 340)

     Courtesy of BMW OF NORTH AMERICA, INC.
2. - Install trim for selector lever 

   TECHNICAL INFORMATION 

   Latch mechanisms, guides and mounting elements must damaged or missing.

   Fig 2: Selector Lever Latch Mechanisms And Cover

   Courtesy of BMW OF NORTH AMERICA, INC.
   • Check latch mechanisms for damage, if necessary replace trim for selector lever.
   • Clip in trim for selector lever (1).
     Fig 3: Installing Special Tool (00 9 340)

     Courtesy of BMW OF NORTH AMERICA, INC.