61 35... Overview, rain sensor (additional work when replacing the windscreen/sensor replacement)
- 1-Series: E8x
- 3-Series: E9x
- 5-Series: E6x
- 6-Series: E6x
- X1: E84
- Z4: E89
| Sensor type/Sensor shape | With windscreen replacement sensor required | When replacing the sensor/Programming/encoding necessary | When replacing the sensor/Initialization required | Connecting the diagnosis system required |
|---|---|---|---|---|
| Condensation sensor square 30 x 20 mm | Yes | No | No | No |
- 5-Series: E6x
- 6-Series: E6x
- 7-Series: E6x
| Sensor type/Sensor shape | With windscreen replacement sensor required | When replacing the sensor Programming/encoding necessary | When replacing substitute visuals Programming/encoding necessary | When replacing the sensor/substitute visuals Initialization required |
|---|---|---|---|---|
| all types square 60 x 40 mm | No | Yes | - | Yes |
| RLS approximately Ø 50 mm | No (new substitute visuals required) | - | No | Yes |
- X5: E70
- X6: E7x
| Sensor type/Sensor shape | With windscreen replacement sensor required | When replacing the sensor Programming/encoding necessary | When replacing substitute visuals Programming/encoding necessary | When replacing the sensor/substitute visuals Initialization required |
|---|---|---|---|---|
| RLPSS (Rain, light and precipitation solar sensor) (Designation is located on the back of the sensor) approximately Ø 50 mm |
Yes | Yes | - | Yes |
| RLS (vehicle with no HUD
) (Designation is located on the back of the sensor) approximately Ø 50 mm |
No (new substitute visuals required) | - | No | Yes |
| RLSS (vehicle with HUD
) (Designation is located on the back of the sensor) approximately Ø 50 mm |
Yes | Yes | - | Yes |
- 1-Series: E8x
- 3-Series: E9x
- X1: E84
- X3: E83
- Z4: E89
| Sensor type/Sensor shape | With windscreen replacement sensor required | When replacing the sensor Programming/encoding necessary | When replacing the sensor Initialization required | Connecting the diagnosis system required |
|---|---|---|---|---|
| all types square 60 x 40 mm | No | Yes | Yes | Yes |
- 5-Series: F1x
- 5-Series GT: F07
- 6-Series: F06, F1x
- 7-Series: F0x
- X3: F25
- X4: F26
| Sensor type/Sensor shape | With windscreen replacement sensor required | When replacing the sensor Programming/encoding necessary | When replacing substitute visuals Programming/encoding necessary | When replacing the sensor/substitute visuals Initialization required |
|---|---|---|---|---|
| all types approximately Ø 35 mm | No | No | - | Yes |
| all types approximately Ø 50 mm | Yes | Yes | - | Yes |
| Only for F25: RLS approximately Ø 50 mm | No (new substitute visuals required) | - | No | Yes |
- X5: F15, F85
- X6: F16, F86
| Sensor type/Sensor shape | With windscreen replacement sensor required | When replacing the sensor Programming/encoding necessary | When replacing the sensor Initialization required | Connecting the diagnosis system required |
|---|---|---|---|---|
| all types approximately Ø 35 mm | No | No | No | No |
- 1-Series: F2x
- 2-Series: F2x
- 3-Series: F3x, F8x
- 3-Series GT: F34
- 4-Series: F3x, F8x
| Sensor type/Sensor shape | With windscreen replacement sensor required | When replacing the sensor Programming/encoding necessary | When replacing the sensor Initialization required | Connecting the diagnosis system required |
|---|---|---|---|---|
| all up to 03/2014
except SBS (01) (Designation is located on the back of the sensor) approximately Ø 35 mm |
No | No | Yes | Yes |
| SBS (01) (Designation is located on the back of the sensor) approximately Ø 35 mm |
No | No | No | No |
| All as from 03/2014 approximately Ø 35 mm | No | No | No | No |
BMW i:
| Sensor type/Sensor shape | With windscreen replacement sensor required | When replacing the sensor Programming/encoding necessary | When replacing the sensor Initialization required | Connecting the diagnosis system required |
|---|---|---|---|---|
| all types approximately Ø 35 mm | No | No | No | No |
MINI (all):
| Sensor type/Sensor shape | With windscreen replacement sensor required | When replacing the sensor Programming/encoding necessary | When replacing the sensor Initialization required | Connecting the diagnosis system required |
|---|---|---|---|---|
| all types square 60 x 40 mm | No | Yes | Yes | Yes |
| all types approximately Ø 35 mm | No | No | No | No |
Rolls-Royce (all):
| Sensor type/Sensor shape | With windscreen replacement sensor required | When replacing the sensor Programming/encoding necessary | When replacing the sensor Initialization required | Connecting the diagnosis system required |
|---|---|---|---|---|
| all types square 60 x 40 mm | No | Yes | Yes | Yes |
| all types approximately Ø 35 mm | No | No | Yes | Yes |
| all types approximately Ø 50 mm | Yes | Yes | Yes | Yes |