65 83 020 Removing and installing (replacing) Car Information Computer (CIC)
IMPORTANT:
Risk of damage!
A hard disk is installed in the Car Information Computer (CIC).
Carry out mechanical work on the CIC and adjacent components with care.
Avoid subjecting the CIC to vibration/shocks.
IMPORTANT:
Read and comply with NOTES
on protection against electrostatic damage (ESD protection).
NOTE:
Comply with notes and notes on HANDLING OPTICAL FIBRES
.
Necessary preliminary tasks :
- Disconnect BATTERY EARTH LEAD .
- Remove RADIO AND IHKA CONTROLS
NOTE:
Picture for example purposes only!
Unfasten screws (2).
Pull CIC (3) out of guide.
Installation note :
Make sure CIC (3) is correctly seated in guide lugs (1).
Unlock plug connections (2) and (3) and disconnect.
Remove CIC (1).
Only for US models with satellite radio :
When replacing the CIC unit, additional work is required!
- Refer to information REPLACING SATELLITE TUNER, AS OF 09/2009 .
Replacement :
Carry out VEHICLE PROGRAMMING/ENCODING .
For vehicles with Teleservices optional equipment :
- Update services via menu in the central information display.
Load additionally for following vehicles' service history :
- 1-Series F2x, 3-Series F3x from series introduction
Load service history :
- 05 Maintenance and Pre-Delivery Check
- Service history