63 17 070 Removing and installing (replacing) left fog light (LED technology)

IMPORTANT: Follow notes for HANDLING BULBS/LIGHT SOURCES (EXTERIOR LIGHTS)

Necessary preliminary tasks :

Fold wheel arch cover (1) back.

Unfasten plug connection (2) and disconnect.

Fig 1: Identifying Wheel Arch Cover And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Release nut (2) and remove fanfare (3).

Fig 2: Identifying Fanfare, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 63 12 2AZ .

Remove fog light (2) out of bumper panel (3) in direction of arrow.

Fig 3: Removing Fog Light Out Of Bumper Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note :

Guides (1) on fog light (2) must not be damaged or missing.

Fig 4: Identifying Guides And Fog Light

Courtesy of BMW OF NORTH AMERICA, INC.

On replacement of fog light or bumper panel at front :