51 16 210 Removing and installing/replacing the trim for the selector lever
SAFETY INSTRUCTIONS:
Risk of damage:
Scratches.
Tools and sharp-edged components can cause scratches.
- Protect working area.
- Handle tools and components carefully.
OVERVIEW OF SPECIAL TOOL:
0 493 687 (00 9 340) Dismantling aid
SPECIAL TOOL DESCRIPTION
| Usage | (Dismantling aid (2 x)) For levering out switch block on driver's door. |
| Included in the tool or work | |
| Storage location | |
| Replaced by | |
| In connection with | |
| SI-Number | 01 15 99 (483) |
SPECIAL TOOL DESCRIPTION
| Pos | BMW Order number | Replaced by | Designation | In Connection with |
|---|---|---|---|---|
| 1 | 0 496 289 (00 9 341) | Dismantling aid Only available as a set (2 tools) under 00 9 340 (= 83 30 0 493 687). |
KEY PROCESSES:
- Remove trim for selector lever
- Partially fit special tool 0 493 687 (00 9 340) as pictured.
- Lift trim for selector lever (1) all around and remove upwards.
- If necessary, unlock associated plug connection and disconnect.
- Install trim for selector lever
Technical information:
Latch mechanisms, guides and mounting elements must not be damaged or missing.
- Check latch mechanisms for damage, if necessary replace trim for selector lever.
- Clip in trim for selector lever (1) .