65 77 016 Removing and installing/replacing airbag control unit
WARNING:
NOTE AIRBAG SAFETY REGULATIONS!
Incorrect handling can activate airbag and cause injury.
Incorrect handling can activate airbag and cause injury.
IMPORTANT:
Read and comply with NOTES
on protection against electrostatic discharge (ESD protection).
Necessary preliminary tasks:
- Disconnect battery earth lead . See 61 20 900 DISCONNECTING AND CONNECTING BATTERY EARTH LEAD or 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD
- Remove TRIM PANEL FOR PEDAL MECHANISM
Release screw (1).
Tightening torque 65 77 1AZ .
Unlock plug connections (2) and disconnect.
Pull airbag control unit (3) out of holder in direction of arrow.
Replacement:
Carry out VEHICLE PROGRAMMING/ENCODING .