11 34 560 Replace all valve stem seals (N47D20 K/U/O/T 1)

Special tools required:

Necessary preliminary tasks:

Tap open valve stem seal (1) with special tool 11 1 480 or with a size 13 or 14 hexagon bit.

Remove valve stem seal (1) with a twisting and pulling action.

Fig 1: Identifying Valve Stem Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

The contact surface (1) must be clean.

Fig 2: Identifying Contact Surface

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Before installing the valve stem seals, the protective grommet must be fitted on the valve stem Risk of damage! to the sealing lip!

Press on valve stem seal (1) to stop using special tool 11 6 380 in direction of arrow.

Fig 3: Pressing Valve Stem Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.