22 11 001 Replacing right engine mount (N55)

Necessary preliminary tasks: 

• Remove engine support arm  See 22 11 100 REPLACING RIGHT ENGINE SUPPORT ARM (N55)  or 22 11 100 REPLACING RIGHT ENGINE SUPPORT ARM (N55) .

Release screws (1).

Tightening torque 22 11 1AZ .

Remove engine mount.

Fig 1: Identifying Engine Mount Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Rubber part (1) of engine mount must point to center of vehicle.

Fig 2: Identifying Engine Mount Rubber Part

Courtesy of BMW OF NORTH AMERICA, INC.