13 71 150 Removing clean air pipe (N47 D20 O 1 with SCR)

Necessary preliminary tasks: 

• Remove INTAKE SILENCER HOUSING .

Press down locking hook and detach hose (1) for engine ventilation.

With the heating element installed, unlock connector from heating element and pull off.

Release screw (2).

Tightening torque: 13 71 2AZ .

Unfasten clip (3) on turbocharger. Detach clean air pipe (4), maneuver it out and remove upwards.

Fig 1: Identifying Exhaust Turbocharger Clamp And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.