61 31 043 Removing and installing/replacing roof switch cluster

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Carefully lever out roof switch center (1) with special tool 00 9 317 and lower slightly.

Fig 1: Removing Roof Switch Centre Using Special Tool 00 9 317

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock retaining clips (1) and feed out roof switch center in direction of arrow.

Fig 2: Removing Retaining Clips Out Roof Switch

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1) and remove roof switch center.

IMPORTANT: Disconnecting the plug connection for the hands-free microphone or emergency SOS call button results in fault memory entries in the telephone control unit (limitation in the emergency SOS call system).
After fitting, read out fault memory and if necessary delete entries.

Fig 3: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

If necessary, remove BULBS .

Carry out vehicle programming/coding.