65 11 080 Removing and installing/replacing radio

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

NOTE: Comply with notes and instructions on HANDLING OPTICAL FIBRES .

Necessary preliminary tasks

Pry out trim (1) with special tool 00 9 323 and remove.

Fig 1: Prying Out Trim Using Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Pull out radio (2) towards front.

Unlock associated plug connections and disconnect.

Fig 2: Identifying Radio With Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

US version only:

If there is a violet aerial connection (1) as well as the black aerial connection (2), additional tasks are required when replacing the radio!

Read and observe document REPLACING SATELLITE TUNER .

Fig 3: Identifying Violet Aerial Connection And Black Aerial Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Carry out vehicle programming/encoding.